Reach Mowers
ÉRIS
Front- or rear-mounted mower-scrub cutter
OBTENEZ UNE RÉPONSE
Une offre commerciale ? Une question technique ?
Dialoguer avec nos experts.
The ÉRIS range is the perfect fit for the new generation of LAGARDE scrub cutters. This brush cutter range, with its accessories, reliability and design, sets new standards to aspire to in grounds and garden maintenance.
The standard essentials
- Right-hand arm Éris 320 et Éris 380
- Rotor power 25 HP
- PTO 540 rpm
- Collision safety Mechanical via spring with automatic return
- Collision safety Fixed to hitch, adjustable spring
- Grass rotor shredding unit with Y-blades ERIS 320: cutting width 90 cm - ERIS 380: cutting width 1.0 m
- Direct drive by Group 2 motor
- Cable-controlled rotor
- Rouleau palpeur Ø 120mm
- Follower roll, Ø 120 mm
- Rugged, up to 20 mm thick plus reinforcements
- Pivot at the centre of the machine for optimum balance
- 15+10-mm thick doubler plates
- 1st arm link pin centred to optimise arm mower swing. 1st arm hydraulic cylinder with double fixing position for better work in vertical or downwards position.
- 4-mm body plate
- 6-mm reinforced body side walls
- Ø 120 mm for good ground following
- Self-aligning ball bearings
- Machined assembly for perfect concentricity
- Open centre hydraulic circuit
- Double pump with 50 L/min flow
- Group 2 motor
- Group 2 gearbox connects directly to tractor PTO
ROTOR
Cutting tools arranged spirally
Machined tube and flanges for perfect concentricity and solidity
ROTOR BEARINGS
Baffle protection to prevent wire and twine clogging
High level sealing (double lip seal + felt seal)
- 11 kW
- Automatic thermostat
- Capacity 80 l
- Oil change every 1000 h
Direct rotor drive by Group 2 motor
FIRST cable control
Offers easy to master cable control that will be particularly suitable for occasional use.
Reverse switch safety and lever-action safety stopping.
EP3 joystick control
- Easy combination of movements
- Electrically-controlled two-way rotor rotation.
- Adjustable stand legs
- Runners for forklift truck forks
- Grass rotor
- Standard hitch
Kinematics
- Horizontal reach A (m) : 3,20
- Vertical reach B (m) : 4,10
- Ditch reach C (m) : 1,70
- Bank reach D (m) : 3,30
- Height on hedge E (m) : 3,30
- Hedge-side reach F (m) : 1,00
- Arm type and sweep : right-hand arm, without slew
- Obstacle safety feature : spring on hitch
- Unit rotation angle : 220°
- Weight(kg) : 440
- Min. recommended tractor power (HP) : 30
- Min. recommended tractor weight (kg) : 1500
- Horizontal reach (m) : 3,80
- Vertical reach B (m) : 4,65
- Ditch reach C (m) : 2,30
- Bank reach D (m) : 3,90
- Height on hedge E (m) : 3,40
- Hedge-side reach F (m) : 1,00
- Arm type and sweep : Right-hand arm, without slew
- Obstacle safety feature : Spring on hitch
- Unit rotation angle : 220°
- Weight(kg) : 480
- Min. recommended tractor power (HP): 30
- Min. recommended tractor weight (kg): 1800
- Other models that may interest you
